Storage Box Mold Plastic Tooling and batch production
Draw all the parts
Drawing from the assembly diagram of the drawing assembly drawing order should be: the first inside and outside after complex first simple, first molding parts, after the structural parts.
1. Graphic Requirements: Be sure to draw in proportion to allow zoom in or out. The view is reasonable, the projection is correct, well-arranged. In order to make it easy to read and process the patent number, it is easy to assemble. The graphics are consistent with the assembly drawings as far as possible, and the graphics should be clear.
2. Dimension requirements of uniform, centralized, orderly and complete. The order of the dimensioning is as follows: first main part size and draft, and then with the size, and then mark the full size. In the non-main parts figure marked with the size of the first, after marking all the dimensions.
3 surface roughness. Mark one of the most applied roughness on the top right corner of the drawing, as marked "Remaining 3.2." Other roughness symbols are marked on each part of the part.
4. Other details such as part name, mold drawing number, material grade, heat treatment and hardness requirements, surface treatment, pattern ratio, free-form machining accuracy, technical description, etc. must be correctly entered.
Q: Do your guys can design 2D and 3D mould?
A: Yes, we do. You may send RFQ to have a testing!
Q: Do your guys have experience in pen mould making?
A: Yes, we do. You may send request details to us such as (HASCO STANDARD or LKM or Chinese mould base, quantity ,mould life) etc…!